Details

---

The TECH OT-LC BLACKOUT is an all black, large capacity wide open tote with our V-SWAP™ system of removable/swappable panels, and additional open space that can be reoriented to accommodate multiple tools and gear for a variety of tasks. An integral structural box features a repositionable insert box and magnetic lid functioning as both storage for small items or as a partition and includes 2 plastic partitions for further customization of the center box. The TECH OT-LC BLACKOUT comes with the 10 pocket panel and 15 pocket panel, as well as with the Bulk Storage panel. Additional panels, insert boxes and partitions are available and sold separately.

NOTE: THIS BAG COMES WITH THE 10 AND 15 POCKET PANELS, AS WELL AS THE BULK STORAGE PANEL. YOU DO NOT HAVE TO SELECT ANY PANELS BELOW FOR THE BAG TO COME WITH THESE PANELS, THOUGH YOU MAY PURCHASE ADDITIONAL PANELS BELOW TO OFFER A VARIETY OF CONFIGURATIONS.

PRODUCT SPECIFICATIONS:
Height (H): 12” (30.5cm)
Width (W): 16” (40.5cm)
Depth (D): 12” (30.5cm)
Handle Height (HH): 18" (46cm)
Weight (empty): 9lbs/4kg
Internal Volume: 950in3 / 15.5L
Max Payload: 40lbs/ 18kg

MAXIMIZED TOOL STORAGE CAPACITY:
43 Available Pockets
V-SWAP™ Removable Tool Pocket Panel System
Tactical all-black construction
Optional Bulk Panel Storage Included
2 Movable Plastic Partitions and 1 Magnetic Lid and Insert Box
Holds Up To 4 Removable Insert Boxes
Exterior Utility Pocket
Electrical Tape Strap
Detachable Padded Shoulder Strap
Waterproof Polypropylene Base for moisture and abrasion protection
Blackout Colorway

OTHER FEATURES:
Warranty: 5 Years (see Veto warranty terms and conditions)


VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

DISCLAIMER : TOOLS ARE NOT INCLUDED. THE ILLUSTRATION SERVED AS FUNCTIONALITY ONLY!